Monthly Archives - July 2018

rooftop garden in gurugram

Beginners Terrace Gardening FAQs

Beginners Terrace Gardening FAQs

Are you a beginner getting into Terrace Gardening in India ?

Look no further, We have compiled few of the most Frequently Asked Questions to us as a Landscape Servicing company for Green Building Projects.

One of Rooftop projects on an apartment building in gurugram.

The most popular questions related to terrace gardening are listed here. Browse through it and be on your way to setting up the perfect urban rooftop garden.

We will be Constantly updating this FAQ page for Beginners & experts, to Help them Find way to bringing fresh produce from their rooftop to Kitchen table.




Food Tech

Also called a roof garden,it is a garden in which vegetables, fruits or flowers are grown on terraces, balconies or roofs of buildings. The kitchen garden, a standard in every Indian household, has now shifted to the roof due to constraints of space, and is called a terrace garden. Increasing pressure on land and escalating costs have also added to its growing popularity.

These gardens can be created on almost all kinds of buildings like residential flats, individual houses, commercial hubs, godowns and factories.

A simple water proofing of the roof is enough. Various water proofing products are available in the market that will ensure that the roof is protected, water-resistant and leakage-free.

Plants with fibrous roots do not cause any harm to the roof but avoid plants with tap roots (like mango) as they may penetrate the roof and harm it by growing its roots in the structure. Sometimes the wind or birds may bring seeds that can germinate and take root on the roof itself. These should be checked for and removed.

You can begin greening your terrace with these simple steps, and then move on to bigger ideas:

  • Take any simple pot or ‘gamla’ or better still recycle any of your old containers.
  • Mix compost, soil, coir peat (or sand) and vermicompost in equal quantities.
  • Cover the drainage hole at the bottom of the container with a broken pot piece or a flat stone, and fill it up with the mixture. You will have to drill a hole in a recycled container first.
  • Pour water and check that no soil is discharged through the bottom hole.
  • Wet the soil and plant your seed or sapling.
  • Watch your greens grow!

You can start with something from your kitchen shelf, that is available and used in everyday cooking like coriander (dhaniya), fenugreek (methi), gram (chana) and chilli (mirchi). Once you gain confidence you can move onto vegetables of your choice and even grow fruit trees like banana and pomegranate. Almost all vegetables can be grown (creepers, drumstick, lime, tomatoes).

You can grow at least 6 vegetables per season. Your 1 sqm of terrace area can give you anywhere between 25 to 50 kg of vegetables in a year.

You don’t need any farming background to start a roof garden. It only takes enthusiasm for green living and and willingness to get your hands dirty.

Some of the benefits to health, aesthetics and environment include:

  • Reduce indoor temperature by 6- 8 degree and can reduce air conditioning cost
  • Reduce overall heat absorption of buildings and insulate the building against heat and cold
  • Convenience of safe, pesticide-free, healthy green and fresh vegetables
  • Conducive to a routine of physical exercise, clean air and being close to nature
  • Increases amount of oxygen in the air
  • Reduce sound pollution
  • Act as a habitat for city-weary birds

Once your garden is established, an hour a day is more than enough to maintain your green area. It is the perfect area to exercise in and improve your fresh air intake.

Load More


Solar Power FAQ by SolarOcta !

Solar Power FAQ

The sun is source of infinite energy and the energy produced by sun is called Solar Energy. The amount of solar energy reaching the surface of earth is so vast that in one year it is about twice as much as will ever be obtained from all of the Earth’s non-renewable sources of coal, oil, natural gas and mined uranium combined. But most of this free and clean solar energy goes waste in the atmosphere. But with viable technology now available, this energy from sun can be directly converted to electricity by the use of solar Photo-Voltaic (PV) cells. A large no. of cells are arranged together to form a Solar panel. When sunlight falls on these solar panels, it gets converted to electricity and this electricity produced from the sunlight is called Solar Power. The complete system generating the solar energy is called Solar system.

Solar modules convert the sunlight into DC electricity and in specifications which are not suitable for direct use. Additional components are required to convert, condition and monitor the electricity produced so that it may be utilized by common appliances used in homes and offices or may be feed into the grid. This combination of solar panels, inverters, Junction boxes, wires, transformers and other components which finally deliver useful electricity is called a Solar Photo-voltaic (PV) System or a Solar PV Power Plant. The size of a solar power plant can be very small (1 kW or less) which can be easily mounted on home rooftop to thousands of MW (covering huge amount of land).

Grid connected PV systems, as the name suggests, are connected to the electric utility grid. The ground mounted power Grid connected plants have size usually greater than 1 MW and feed electricity into the grid. The roof mounted grid connected plants have sizes from 1 kW onwards but are mostly less than 250 kW and are usually for captive (self) consumption. There is no electricity storage (battery) with these systems and therefore these can provide electricity only in the daytime. One drawback of this system is that it does not provide the electricity when the grid is down and works only when there is supply from the grid. It reduces the load on the grid by as much power as it is generating. It means they are suitable only for areas which have less number of day time blackouts.

Off-grid PV systems provide electricity even during the night as they have dedicated battery banks which get charged during the day and the stored electricity can be used during the night. These systems are not connected to grid and are usually very small in size (less than 50 kW). The large battery banks is the drawback of these systems as they are costly and have to be maintained properly and regularly. These systems are beneficial in Regions with unavailability of Grid f

These systems are connected to the grid but also have a small battery storage or DG set to work with, so that the system can produce power in no-grid conditions. This system brings the best of above two as it is capable of feeding the extra power to the grid as well as provides power when the grid is down within manageable costs.

Various parts of a solar system are:

  • Solar photo-voltaic panels
  • MPPT inverters
  • Solar charge controllers
  • Distribution boxes
  • Mounting Structures
  • Protection & Controls
  • Remote Monitoring System

Solar PV panels convert the sunlight directly into DC electricity. The panels are rated according to their peak wattage. Note that a 200 watt peak solar panel will produce 200 watt power when kept in sun but the power generated throughout the day will fluctuate depending on the time of day and angle of panel with the sun. Three types of panels are available in the market, Mono-crystalline, Poly-crystalline and thin film type in decreasing order of efficiency. Higher efficiency modules require lesser space for installation. Various Indian and foreign panels manufactures are present in the market providing panels with different peak wattages. The best available panels have efficiency around 17 – 22%.

The DC electricity produced by the solar panels is converted to AC by solar inverters. Solar inverters are different from common inverters as they have Maximum Power Point Tracking (MPPT) technology to increase the efficiency of the solar panels. This inverter automatically synchronizes its AC output to the exact AC voltage and frequency of the grid. The efficiency of good quality inverters is greater than 96%.

For a Rooftop SPV plant , a flat or south facing roof is required. The type of your roof and its load bearing capacity can affect the size of solar system which can be installed and the type of mounting structures needed.
Concrete roof and Metal roof can accommodate panels directly or with some special structures but in case of asbestos roof, it is very critical to check the load bearing capacity and mounting feasibility.

For layman terms, It is most important to have a rooftop available with lowest shading throughout the day, as neighboring buildings,trees etc casting a shadow on the Roof might hinder you to Install the maximum capacity Power Plant on it .
But now with Micro-inverters , Roof with Shaded area can also be utilized to mount a Solar Array & thus reap benefits .
Micro-inverters are a bit expensive than the normal string inverters, as for each panel a separate micro inverter needs to be installed .
We will learn more about micro inverters in our blog .

The usual benchmark for energy generated from a 1 kW Solar system is considered as 1,500 units per year. This is a conservative benchmark and actual generation is different for different locations. The amount of actual energy generated from a Solar Power system in a year depends on both internal and external factors. External factors which are beyond the control of a solar installer include the following:

  • Number of sunny days
  • Solar Irradiation
  • Day Temperatures
  • Air Mass

The output also depends on the following internal factors all of which are within the control of a solar installer:

  • Quality of engineering and design
  • Quality of equipment used
  • Quality of installation
  • Maintenance activities

The thumb rule implies 10 sqm of area (about 107 sqfeet) is required to install 1 kW solar panels. However, in existing buildings often the roof area is already utilized with solar water heaters, recreational areas, water tanks and lift rooms. This makes solar rooftops often difficult to install in retro-fit buildings but installation of solar shed on the roof allows the usage of the roof for solar panels or other purposes.

Solar Power is beneficial for anyone & everyone, if you have a landmark which receives plenty of sunlight & area available is shadow free, Solar PV system can be installed on it .
Solar Power system is apt for small consumers, residential, institutional, commercial.

The best benefits for  solar power kick in for High end Consumers who fall under the Unit prices starting at

INR 8 / KWh and slabs going all the way up to INR 13 /unit .

These high power consumers , mostly commercial or institutional require uninterrupted power supply & usually deploy Diesel Generator systems , a DG costs more than a Solar System as an initial investment , along side the operational running cost of the DG is higher as compared to the Solar Power .

Acc. to our market research , generation of a unit for a DG set cost aboout INR 15/unit , due to Constant Input of  Fuel cost , maintenance & system life due to moving parts.
here the cost for Solar Power Generation is INR 5-6/unit.

Those opting for Green Building Certifications , should opt for a Hybrid Solar Power plant with Backup in form of Batteries & a DG set .

Sunlight is important for solar power , but even on cloudy days the Solar Panels are able to produce enough power to meet your requirements .
Just be sure to keep your solar panels in a shadow free area , and they will receive enought sunlight to work .

Solar Panels also work on ambient lighting , but best perform with sunlight , as it packs more energy per square meter .

In bad weather, your panel production won’t be 100%, but your panels will still be producing power. On a cloudy day, your panels might produce 60% to 70%  of what they normally would.
Only exception is if it snows enough for there to be a significant accumulation on your panels, your panels will not produce electricity.

Also Solar Panels from Tier 1 manufacturers are tested for Snow loads & Hail Storms , So your panels will not crack the glass even on heavy hail storms or snow storms .
Panels get cleaned best by rainwater , as rainwater is distilled water .

For a home or office with a connection of 15KW – it is not viable to install 15KW solar system because no one utilizes 100% power all day. Only the main requirements which run continuously can be shifted to solar like the TV, Computer, AC, Refrigerator, Accessories etc. Therefore, customers with a power supply of 15KW from the Grid, should ideally go for a 5 to 10 KW solar panel installation. This rule also applies for industries who are looking for Solar Energy system for Power solutions.

Acc. to MNRE & Government of India , 70% of the sanctioned Load connection can be applied for Solar Grid Tie Power Plant , Meaning if you have a 10 KW connection from the Utility power Supply aka DISCOM , You are eligible for Connecting a 7 KWp Rooftop Solar Power Plant to the Net metering Connection with your DISCOM .

This being said ,

It doesn’t mean you cannot Install more of Rooftop Solar Power ,
if you have the area availability , you are eligible to install as much Solar Power Plant capacity as you want , Conditions being , you will have to consume the Power generated on site , as captive load , and are only allowed to Feed in a Particular number of units per year into the Utility supply by DISCOM  , also the DISCOM will Reduce your Feed-in-tariff for the Same .
But ,
Hey , if you have a large empty roof, install the maximum capacity of Solar Power Plant, & share some Solar power with your neighbours , They will surely pay you for your Solar Power , because Solar Power is Cheap , Clean , Green & Renewable .
We have seen this taking place, & neighbours installing Rooftop Solar Power plants , resulting in a Neighborhood Solar Grid .

Your neighbours will think you did it to save the environment but you know you did it to save Money !

On Grid Solar


  • Simple design, and low maintenance
  • It can be easily integrated for net-metering.
  • All appliances can work on it, since wiring does not need to change.


  • Only works when grid power (reference line) available. In case of power cuts, solar electricity cannot be used, since it depends on a reference voltage from grid power.

Best used for

  • An on-grid system is ideal when you would like to lower your electricity bills, and do not need power backup.


Off-Grid or Hybrid Solar


  • In areas with unreliable power, people often have batteries and an inverter system for more steady electricity. Solar power can be added to charge batteries faster when grid-power is present, and to power appliances when it is not.


  • Wiring for the solar system is separate, so typically only a few appliances are hooked up to use that electricity.
  • Batteries require maintenance and need to be changed every three or four years. Maintenance-free batteries are typically more expensive and so, less popular.

Best used for

  • An off-grid system is best suited if you have unreliable electricity and are looking to decrease disruption to your life due to that.

No. On an average, solar panels add only 1-2 kg of weight per square foot of roof area. All roofs are typically able to withstand significantly more weight than this.

Also, when the Site Visit is done by an Oorjan representative, they will inspect the roof for robustness. In the unusual event of the roof not being able to support the weight of the solar system, they would be able to suggest reinforcement mechanisms that would make a rooftop system possible.

Rooftop systems are very durable, and have an average lifetime of 25 years. During this period, if roof work ever has to be done, the rooftop system can be easily dismantled and reassembled. So, future roof work is always possible.

Uttar Pradesh Solar Policy . PDF

UP rooftop solar policy 2016 PDF

Chhatisgarh Solar Policy 2012-2017 PDF download

Load More

Save Money With Solar
close slider

Save Money With Solar